Edelbrock's AVS2 Off-Road Carburetor #1916 with Electric Choke is a special 650 CFM version of the proven #1906 street carb with Annular Flow Booster technology for near-EFI-like drivability that you can feel as soon as you step on the gas. Like AVS2 street carbs, the AVS2 Off-Road features an annular ring with eight evenly spaced orifices that replaces the standard single brass tube (down-leg) fuel feed. The AVS2 Off-Road booster ring distributes fuel into the airflow stream with an even spray that eliminates flat spots and greatly improves throttle response in the low-to mid-RPM range without sacrificing top-end power. For superior fuel control over rough terrain, the AVS2 Off-Road features a new spring-loaded needle and seat along with a spring-loaded anti-syphon ball in the accelerator pump circuit to prevent fuel drip common with standard carbs in off-road situations. The AVS2 Off-Road is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 Off-Road carbs have the unique ability to hold a tune when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 Off-Road offer the most accurate and up-to-date calibration available for today's fuels and octane levels. Additionally, the unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application. AVS2 Off-Road Carburetors feature a two-piece design for easy tuning that allows you to make float level adjustments or replace internal components without draining the carburetor or removing it from the engine. The AVS2 Off-Road 650 CFM is available with a manual (#1915) or electric (#1916) choke and are manufactured by Edelbrock in the USA
Carburetor
Documents
Attributes
Barrel Quantity: | 4 Barrel |
Metering Rod Size: | .073 x .042 IN |
Gasket Or Seal Included: | Yes |
Primary Jet Diameter: | 0.104 IN |
Maximum Flow Rating: | 650 2L |
Bore Diameter: | Primary Bore 1.44; Secondary Bore 1.75 IN |
Series: | AVS2 |
Body Height: | 3.25 IN |
Spring Force: | 5" Hg (Orange) |
Finish: | Satin |
Flange Shape: | Square |
Choke Type: | Electric |
Main Venturi Diameter: | 1.19 IN |
Condition: | New |
RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Secondary Jet Diameter: | 0.098 IN |
Package Information
Package Length:13.25 INPackage Width:7.38 INPackage Height:6.75 INWeight:9.1 LBOrderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00085347019168Package Bar Code:00085347019168Weight Variance:0.000000000Stacking Factor:0Inner Quantity:1 Each
Extended Information
Core Return Days to Expiry:0Country of Origin (Primary):USEmission Code:Off RoadHarmonized Tariff Code (HTS):8708996800Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderNAFTA Preference Criterion Code:Criteria BNational Popularity Code:New Item 3 Months, 6 Months, etc.National Popularity Description:New Item 3 Months, 6 Months, etc.Refurbished Part:NoRemanufactured Part:NoTaxable:YesWarranty Time:12Warranty Time UOM:Month
Edelbrock
Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.
Edelbrock Corporation has six locations: Three in Torrance California, two in San Jacinto, California, and one in Sanford North Carolina totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support. Less than a mile away is Russell Plumbing and our Distribution Center.
Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called "the most state-of-the-art sand cast foundry west of the Mississippi." This investment in American facilities is part of our commitment to "Made in USA" products and performance.
Edelbrock products start with an original thought or idea that then has to be translated into a working model. Our R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts. Why is being an enthusiast so important? Because an enthusiast does more than work in the automotive aftermarket, they live it - and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature. They are constantly thinking of new and innovative ways of making a product that works better.Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered, manufactured, and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.
Founded in 1938, Torrance-based Edelbrock, LLC. is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive aftermarket.